2025 Ditch Witch® Vibratory Plows 100SX

Information

2025 Ditch Witch® Vibratory Plows 100SX

THE POWER YOU NEED TO GET THE JOB DONE.

The Ditch Witch 100SX vibratory plow has high-flotation tires that provide the traction you need without manhandling the turf.

Features may include:

POWER AND PRODUCTIVITY
  • A reliable, 13.5-hp (10-kW) Briggs & Stratton XR2100 Series gas engine delivers the power you need without assaulting your ears.
PRODUCTIVITY
  • The 100SX’s feed and pull blades are available for installing cable, pipe, and other material. And, a hydrostatic ground drive provides greater traction, maneuverability and durability.
RUGGED DESIGN
  • All controls are accessible from the operator’s position for easy operation and its compact size allows access through a standard yard gate. Designed to install power and communication lines up to 1 inch (25 mm) in diameter and natural gas, water service and sprinkler systems up to .75 inches (19 mm) in diameter.
SUPERIOR CUSTOMER SUPPORT
  • Your Ditch Witch equipment is backed by a worldwide network of dealers you can count on for unmatched commitment to your success. From genuine Ditch Witch parts to factory-trained service to expert advice, your Ditch Witch dealer has it all for you.

Photos

Highlights

  • Pearl, Mississippi
  • 2025
  • Ditch Witch®
  • Vibratory Plows 100SX
  • Model: 2100 Series
  • Gasoline
  • Available
  • Max: 35 in (889 mm) | Min: 32.5 in (825.5 mm) | Plow blade Max: 0.77 in (20 mm) / min: 0.38 in (10 mm)
  • Min/max: 40 in (1.02 m)

Specifications

  • 2025
  • Ditch Witch®
  • Vibratory Plows
  • 100SX
  • General
  • Model: 2100 Series
  • Briggs & Stratton®
  • Manufacturer’s gross power rating (per SAE J1940): 13.5 hp (10 kW)
  • 3,600 rpm
  • medium: Air
  • Natural
  • Gasoline
  • 1
  • 25.6 in3 (420 cc)
  • 3.54 in (90 mm)
  • 2.6 in (66 mm)
  • Drive type Ground: Hydrostatic | Plow: Belt w/hand clutch
  • Max: 18 x 11-8 / Min: 16 x 6.5-8
  • Ground drive speed, max Forward/reverse: 92 fpm (28 m/min)
  • 2,500 psi (172 bar)
  • Rate: 2.2 gpm (8.3 l/min)
  • Material installation diameter, max Pull blade: 0.88 in (22 mm) | Feed blade: 0.5 in (13 mm) | Material bend radius, max/min Feed blade: 1 in (25 mm)
  • Min/max: 40 in (1.02 m)
  • Min: 67 in (1.7 m)
  • Max: 35 in (889 mm) | Min: 32.5 in (825.5 mm) | Plow blade Max: 0.77 in (20 mm) / min: 0.38 in (10 mm)
  • Max: 4.1 in (104 mm) / Min: 12 in (305 mm)
  • Plow blade: 12 in (305 mm) / min: 6 in (152 mm)
  • 1.8 gal (6.8 L)
  • Reservoir: 3.5 gal (13.2 L)
  • Basic unit: 720 lb (326 kg)